L-SF40 Small Benchtop Pick & Place Machine
The new entry-level L-SF40 is a complete, low-cost turnkey automatic pick and place system that can be put in production right out of the box. The system is managed by a full desktop Windows® computer with flat screen monitor.
Prototyping - Pilot Manufacturing - Low Volume Production
Features
- Provides the most economical solution in a fully automated pick and place bench-top system
- Capable of placing a wide range of components from 0201 discretes and SOICs to PLCCs and 20 mil QFPs
- Placement rates up to 1800 cph
- Friendly, easy to use Windows® based software
- Tape strips can be set up easily using the unique PIK-strip™ feeders
- 8,12,16,24,32 & 44 mm PIK-strip™ feeders available
- Capable of handling cut tape, stick/tube and loose components
Info Request View Literature Request Manual Get A Quote
Read the article "Selecting a Pick & Place Machine."
| Max board size | 13.5" x 22" (343 x 560 mm) |
| Smallest component capability | 0201 packages standard |
| Largest component size | 1.378" (35mm) square body |
| Placement accuracy | ±0.004" |
| Typical verifiable placement rate | 1200-1800 cph |
| Fine pitch capability | down to 20 mil pitch (0.508mm) |
| Max travel area | 22" (x axis) x 22"(Y axis) (560 x 560 mm) |
| Matrix Tray Feeders | with Board/Matrix tray holders |
| Vision system | Color CCD card camera |
| Dispenser Option | Time & pressure, clean dry air @ 80 psi required |