NS-13S NovaSelect Series Selective Solder Machine

DDM Novastar NovaSelect Series Selective Soldering SystemNovaSelect Series is an economical, compact selective solder system providing the convenience and flexibility of single point, drag, and mini-wave soldering. Ideal for low volume/high mix through hole soldering requirements, the system includes: Spray Fluxer, Bottom-side Preheat, and Lead/Lead Free Solder Pot, and is Nitrogen ready. Options include Topside Preheat, along with a wide assortment of nozzles.

Prototyping - Product Development - Short Run, High Mix Applications

  • System includes: Spray Fluxer, Bottom-side Preheat & Lead/Lead Free Solder Pot with Nozzle.
  • Through-hole soldering flexibility - single point, drag, mini-wave, or dip soldering.

System Features

  • Easy to use Windows based operating software
  • Programming with Gerber Import
  • Windows Laptop Included
  • Topside Pre-Heat Option
  • Witness Camera Option
  • Wide Nozzle Assortment
  • Nitrogen Ready (Nitrogen supplied by customer)
  • Ease of Operation, small footprint, & durable construction

Options

  • Nitrogen Generator System
  • Witness Camera Option
  • Topside Pre-heat Option
  • Custom Nozzles
  • Custom Board Pallets
  • Optional Stand

Info Request      View Literature      Request Manual      Get A Quote

Use our handy Product Selection Tool to determine the best machine for your needs.

Max board size 330mm x 330mm (13" x 13")
Min. Neighbor Component Clearance 1.5-3mm (0.06"-0.12") depending on nozzle size
Preheater
Solder Capacity Approximately 15 lbs.
Pressure (Nitrogen) 2 bar (30 psi)
Flux System Micro Spray
Solder Pot and Pump
Warm up Time 30 minutes
Max Temperature 320°C (608°F)
Consumption (Nitrogen) 0.8-1.7 CFM (23-49 liters/min) dependent on nozzle
Air Pressure 5.5 bar (80 psi)
Phone: 215-485-5663  |  Fax: 215-485-5664