The NovaPlace Series

DDM Novastar NovaPlace Series Pick and Place MachineThe NEW NovaPlace Series is a complete, low-cost turnkey automatic pick and place system that can be put in production right out of the box. Once a specific PCB is programmed, the machine automatically picks up each component from its designated feeder or tray, centers the part and moves to the placement location, and accurately places the part. The feeders automatically position the next component for pick-up.

Prototyping - Pilot Manufacturing - Low Volume Production

  • Provides affordable automatic pick and place operation in a tabletop system
  • Easy to set up, easy to program and easy to use with WindowsTM based software
  • CAD editing Software
  • System includes 4 position nozzle changer for most SMT component sizes
  • Placement accuracy, up to 0.001"
  • Enhanced Accuracy & Repeatability with Linear Scales & Encoders
  • Uses new Micro Stepper Technology
  • Placement rates up to 2100 CPH
  • Cut tape strip holders available in various widths & configurations
  • Individual 8, 12, 16, 24, 32 & 44 mm & 12 lane 8mm tape bank feeders available. (Not available on the L-NP00 Model)
  • Inserts available for stick/tube/loose components in a vibratory feeder for SMT components including discretes, 0402s, 0603s, SOICs, PLCCs, and 20 mil pitch QPPs
  • Optional convenient SuperStrip™ feeders for short tape strips

Info Request      View Literature      Request Manual      Get A Quote

Read the article "Selecting a Pick & Place Machine."

Use our handy Product Selection Tool to determine the best machine for your needs.

Max board size: 13.5" x 22" (343 x 560mm)
Smallest component capability: 0402, 0201
Largest component size: 1.378" (35mm) square body
Placement accuracy: ±0.004" to 0.001"
Max placement rate: 2100 cph
Typical verifiable placement rate: 1000-1800 cph
Fine pitch capability: 25 mil, 15 mil
Max travel area: 22" (X axis) x 22" (Y axis) (560 x 560mm)
Overall dimensions: 40" x 42" x 25"h (1016 x 1067 x 635 mm)
Max no. of feeders (8mm tape): 64 (individual), 96 (bank)
Max no. of feeders with L-GB-12 bank feeders: 96
Tape feeders: 8 mm, 12 mm, 16 mm, 24 mm, 32 mm and 44 mm
Vibratory Feeders: loose, tube, stick (Freq. & amplitude control)
Matrix Tray Feeders: with Board/Matrix tray holders
Laser Centering: Centering Fingers
Vision system: Color CCD card camera
Dispenser Option: Time & pressure, clean dry air @ 80 psi required
Phone: 215-485-5663  |  Fax: 215-485-5664