ESS Selective Soldering Machines

If you are considering automating your selective soldering process, then you need to consider the ESS Selective Soldering Machines. The cost of entry into automated, batch, selective soldering has never been easier with the ESS Selective Soldering Machines.

Designed for short run, mixed technology applications, the ESS-500 Selective Soldering Machine will provide the throughput, accuracy, and reliability you are looking for to improve the productivity of your selective soldering process.

All-inclusive system - Flux, Preheat, Solder
Through-hole soldering flexibility - single point, drag, mini-wave, or dip soldering
Reproducible, "zero defect" solder joints
On-board, touch screen interface for easy instrument set-up, programming, and parameter control
Save machine setup time and increase productivity with off-line programming with photoscan and Gerber software
Flexibility with wettable and specialty nozzles

Selective Soldering Machine, Model ESS-310

Info Request View Literature Request Manual Get A Quote

Read the article "Selecting a Selective Soldering System."

Max board size	500 x 500mm (19.7" x 19.7")
Min. Neighbor Component Clearance	1.5 - 3mm (0.06" - 0.12") depending on nozzle size
Preheater	100% IR preheat
Solder Capacity	Approx. 15kg (33 lbs)
Pressure (Nitrogen)	2 bar (30psi)
Flux System	Spray
Solder Pot and Pump	Lead-free, Single
Warm up Time	Approx. 45 minutes
Max Temperature	400°C (725°F)
Consumption (Nitrogen)	0.8 - 1.7 CFM (23 - 49 litres/min) - dependent on nozzle and nozzle shroud
Air Pressure	5.5 bar (80 psi)